{"id":1041,"date":"2022-04-12T08:26:00","date_gmt":"2022-04-12T00:26:00","guid":{"rendered":"https:\/\/chjft.com\/?p=1041"},"modified":"2023-05-22T14:33:29","modified_gmt":"2023-05-22T06:33:29","slug":"tvm802a-support-tvm802b-smt-pick-and-place-machine-software-firmware-update-log","status":"publish","type":"post","link":"https:\/\/www.qhsmt.com\/zh\/2022\/04\/12\/tvm802a-support-tvm802b-smt-pick-and-place-machine-software-firmware-update-log\/","title":{"rendered":"Support TVM802 Series Software Firmware Update Log"},"content":{"rendered":"

TVM802A TVM802B Series desktop smt pick and place machine Software Firmware Update log<\/p>\n\n\n\n

Original factory model: TVM802A,TVM802B,TVM802AX,TVM802BX,
Distributor possible model:SMT TVM802C,TVM802D,TVM802AS,TVM802BS,<\/p>\n\n\n\n

Previous version V3.01 – V3.37
Current Updatable Version V3.38<\/p>\n\n\n\n

Note1:<\/strong><\/h3>\n\n\n\n

Email to your customer service manager to update the latest software.
Please provide your device model, Sn-number and current software version code .<\/p>\n\n\n\n

Note2:<\/strong><\/h3>\n\n\n\n

If you cannot find or forget your manager’s contact or even purchased from a distributor.
Please leave us a message in our website dialog box or email us.
In addition to the device model,SN number and current software version code.
we also need your explain which way you purchased from and your email which we’ll send the software to .
After verifying your information, we will update the software to you ASAP.<\/p>\n\n\n\n

Note3:<\/strong><\/h3>\n\n\n\n

The earliest V1.XX or V2.XX series cannot use the V3.XX version software .
The V2.XX series latest updatable version is V2.39 .<\/p>\n\n\n\n

Note4:<\/strong><\/h3>\n\n\n\n

you need replace two files from the old vision to the new vision
param.dat
matrixup.dat
copy those two files into the new vision<\/p>\n\n\n\n

\"TVM802a<\/figure>\n\n\n\n

<\/p>\n\n\n\n

V3.38—– 2022\/10\/31<\/strong><\/strong><\/p>\n\n\n\n

1.Fix the position of the search button.<\/p>\n\n\n\n

2.Correct some translation errors on the English interface.<\/p>\n\n\n\n

3.Compatible with csv file formats: \\\u201d\\t,\\\u201d<\/p>\n\n\n\n

<\/p>\n\n\n\n

V3.36—– 2022\/7\/4<\/strong><\/p>\n\n\n\n

    \n
  1. Modify the bug that the changes in PCB Array coordinates shall be incorporated into the calculation of mark points.<\/li>\n\n\n\n
  2. 2.Compatible with csv file formats: origin x(mm)\/ origin y(mm)\/rotate<\/li>\n<\/ol>\n\n\n\n

    V3.35—– 2022\/5\/26<\/strong><\/p>\n\n\n\n

    1.       The component table adds the search function;<\/p>\n\n\n\n

    \"TVM802a<\/figure>\n\n\n\n

    2.Modify the bug that the software crashes when the coordinates of the stack s are displayed as empty in the Quick Debug.<\/p>\n\n\n\n

    V3.33—– 2022\/4\/15<\/strong><\/p>\n\n\n\n

    1.Modify the bug that save fails when setting the camera orientation in the Quick Debug.<\/p>\n\n\n\n

    V3.32—– 2022\/1\/31<\/strong><\/p>\n\n\n\n

    1.       Modify the BUG when the stack is set None, the file loading error occurs.<\/p>\n\n\n\n

    V3.31—– 2021\/10\/9<\/strong><\/p>\n\n\n\n

    1.Added the software language switching function.<\/p>\n\n\n\n

    2. Added the software account management function.<\/p>\n\n\n\n

    V3.30—– 2021\/7\/21<\/strong><\/p>\n\n\n\n

    1.       Modify the BUG when passing vision the order of nozzles is wrong.<\/p>\n\n\n\n

    V3.<\/strong>29<\/strong>—– 20<\/strong>21<\/strong>\/<\/strong>3<\/strong>\/<\/strong>26<\/strong><\/p>\n\n\n\n

    1\u3001Modify the BUG about the calculation order of the PcbArray\u2019s coordinate.<\/p>\n\n\n\n

    V3.<\/strong>28<\/strong>—– 20<\/strong>21<\/strong>\/<\/strong>3<\/strong>\/<\/strong>25<\/strong><\/p>\n\n\n\n

    1\u3001Optimize the \u201cAuto Go Home\u201d function, cancel this function switch, and increase the parameter “Auto Go Home Interval”.<\/p>\n\n\n\n

    2\u3001 <\/p>\n\n\n\n

    V3.<\/strong>27<\/strong>—– 20<\/strong>20<\/strong>\/<\/strong>12<\/strong>\/<\/strong>1<\/strong><\/p>\n\n\n\n

    1\u3001Compatible with TXT coordinate file exported by Sprint Layout 6.0 software.<\/p>\n\n\n\n

    2\u3001Modified the BUG when set position of IC Array.<\/p>\n\n\n\n

    V3.<\/strong>26<\/strong>—– 20<\/strong>20<\/strong>\/<\/strong>10<\/strong>\/<\/strong>12<\/strong><\/p>\n\n\n\n

    1\u3001Added a switch for “alarm buzzer sound for place done”\u3002<\/p>\n\n\n\n

    \"TVM802a<\/figure>\n\n\n\n

    V3.<\/strong>25<\/strong>—– 20<\/strong>20<\/strong>\/<\/strong>8<\/strong>\/<\/strong>17<\/strong><\/p>\n\n\n\n

    1\u3001Modify the limit of Z-Axis down height\uff1b<\/p>\n\n\n\n

    2\u3001The alarm buzzer when the head is completed is turned off at the next start\uff1b<\/p>\n\n\n\n

    3\u3001The alarm buzzer when the head is completed is automatically turned off after a period of time\uff1b<\/p>\n\n\n\n

    4\u3001Compatibility of related parameters in different versions when reading system data files\u3002<\/p>\n\n\n\n

    V3.<\/strong>24 <\/strong>—– 20<\/strong>20<\/strong>\/<\/strong>7<\/strong>\/<\/strong>18<\/strong><\/p>\n\n\n\n

    1\u3001Optimize camera coordinate parameters\u3002<\/p>\n\n\n\n

    \"TVM802a<\/figure>\n\n\n\n

    V3.<\/strong>23 <\/strong>—– 20<\/strong>20<\/strong>\/<\/strong>4<\/strong>\/<\/strong>22<\/strong><\/p>\n\n\n\n

    1\u3001Modify the BUG about \u201can error occurred when setting the  coordinate parameter to IC stack\u201d;<\/p>\n\n\n\n

    2\u3001Modify the BUG about \u201c the descending height of Z1 and Z2 Axis are inconsistent\u201d;<\/p>\n\n\n\n

    3\u3001Add the maximum allowable range of position offset value during vision measurement;<\/p>\n\n\n\n

    4\u3001Optimize the speed of the reel.<\/p>\n\n\n\n

    V3.<\/strong>22 <\/strong>—— 2019\/<\/strong>11<\/strong>\/<\/strong>26<\/strong><\/p>\n\n\n\n

    1\u3001Modify the function that the coordinate of IC Stack in the SysConfig can be set and moved with down vision.<\/p>\n\n\n\n

    V3.<\/strong>20 <\/strong>—— 2019\/<\/strong>8<\/strong>\/<\/strong>26<\/strong><\/p>\n\n\n\n

    1\u3001Optimize the data transfer protocol.<\/p>\n\n\n\n

    V3.19 —— 2019\/<\/strong>5<\/strong>\/<\/strong>23<\/strong><\/p>\n\n\n\n

    1\u3001Add the interface display. When selecting the stack in the component list, the corresponding component name is displayed after the serial number of the stack. This name corresponds to the edited component name in “System Config – Stack – Comp”.<\/p>\n\n\n\n

    \"TVM802a<\/figure>\n\n\n\n
    \"TVM802a<\/figure>\n\n\n\n

    2\u3001Add a new button. In the “System Config – Stack – Comp” ,add the \u201cone-key reset\u201d function, the data of the component will be restored to the system default settings;<\/p>\n\n\n\n

    \"TVM802a<\/figure>\n\n\n\n

    3\u3001Optimize the interface display. Optimize the alarm display when the Z axis and the needle are not properly raised, and add a button to eliminate the alarm and lift the needle and Z axis;<\/p>\n\n\n\n

    \"TVM802a<\/figure>\n\n\n\n

    4\u3001Modify the BUG about\u201cthe software will automatically generate \u2018Param.data\u2019 file in the directory where the software is located when the software is opened in the broken line state\u201d;<\/p>\n\n\n\n

    5\u3001Optimize the placement sequence of the components after using the the function \u2018Missing Check\u2019.<\/p>\n\n\n\n

    V3.18 —— 2019\/3\/20<\/strong><\/p>\n\n\n\n

    1\u3001Modify the BUG about \u201cWhen the English version software loads the CSV file,the parameter\u2018Check\u2019 can\u2019t be loaded correctly \u201d;<\/p>\n\n\n\n

    2\u3001Modify the range of parameter \u201cPrickCorrect\u201dto (-4 ~ 4mm).<\/p>\n\n\n\n

    \"TVM802a<\/figure>\n\n\n\n

    V3.17 —— 2019\/3\/5<\/strong><\/p>\n\n\n\n

    1\u3001Modify the BUG about \u201csoftware error occurred while saving CSV file\u201d.<\/p>\n\n\n\n

    V3.16 —— 2019\/1\/5<\/strong><\/p>\n\n\n\n

    1\u3001Modify the BUG about \u201cwhen both nozzle select the type \u2018Vision\u2019 of \u2018Missing Check\u2019 and select the type \u2018Accurate\u2019 of \u2018Vision\u2019 at the same time,the No.2 nozzle will throw component abnormally \u201d.<\/p>\n\n\n\n

    V3.15 —— 2018\/12\/25<\/strong><\/p>\n\n\n\n

    2\u3001Modify the BUG about \u201cthe mounting head works incorrectly when discarding the components and re-feeding at the IC Stack\u201d;<\/p>\n\n\n\n

    3\u3001Modify the BUG about \u201cthe \u2018Check\u2019 column of the components list can not be displayed after loading the CSV file\u201d.<\/p>\n\n\n\n

    V3.14 —— 2018\/11\/21<\/strong><\/p>\n\n\n\n

    1\u3001Add a new function about Missing Check:use vision to check the size of component;<\/p>\n\n\n\n

    \"TVM802a<\/figure>\n\n\n\n

    2\u3001Modify the interface of Stack in the \u201cSys Config\u201d;Add the new parameters about components:\u201cName\u201d\u3001\u201cSize(Width\/Height)\u201d\u3001\u201cMax Error(Default is 10%)\u201d .<\/p>\n\n\n\n

    Note: The data of Stack will be saved to the file which is named as \u201cParam.dat\u201d in the \u201c.EXE\u201d file directory,and the data in the Comp interface will also be saved to the CSV file.<\/p>\n\n\n\n

    \"TVM802a<\/figure>\n\n\n\n
    \"TVM802a<\/figure>\n\n\n\n
    \"TVM802a<\/figure>\n\n\n\n
    \"TVM802a<\/figure>\n\n\n\n

    V3.13 —— 2018\/10\/23<\/strong><\/p>\n\n\n\n

    1\u3001Modify the BUG about \u201cWhen change the CSV file which contains the PCB Array settings, it cause a software error;\u201d<\/p>\n\n\n\n

    2\u3001Modify the BUG about \u201cthe function of shaking the prick needle is disabled.\u201d<\/p>\n\n\n\n

    V3.12 —— 2018\/10\/11<\/strong><\/p>\n\n\n\n

    1\u3001The down height range of Z Axis is adjusted to \u201c-12.5 ~ 0\u201d;<\/p>\n\n\n\n

    2\u3001Modify the BUG about \u201cAfter the components pass through the vision,then the components is discarded and picked again.When the vision recognition is performed again,the correction effect of vision is superimposed.\u201d\uff1b<\/p>\n\n\n\n

    3\u3001 Add the parameter \u201cPick Angle\u201d into \u201cSystem Config – Left Stack \/ Back Stack \/ IC Stack\u201d,each Stack has its own Pick Angle.<\/p>\n\n\n\n

    Left Stack: The default value is \u201c90\u201d,save the data to the \u201cParam.dat\u201d in the \u201c.EXE\u201d file directory;<\/strong><\/p>\n\n\n\n

    \"TVM802a<\/figure>\n\n\n\n

    Back Stack: The default value is <\/strong>\u201c<\/strong>0<\/strong>\u201d<\/strong>,save the data to the <\/strong>\u201c<\/strong>Param.dat<\/strong>\u201d<\/strong> in the <\/strong>\u201c<\/strong>.EXE<\/strong>\u201d<\/strong> file directory;<\/strong><\/p>\n\n\n\n

    \"TVM802a<\/figure>\n\n\n\n

    IC Stack: The default value is <\/strong>\u201c<\/strong>0<\/strong>\u201d<\/strong>,save the data to the <\/strong>\u201c<\/strong>CSV<\/strong>\u201d<\/strong> file.<\/strong><\/p>\n\n\n\n

    \"TVM802a<\/figure>\n\n\n\n

    4\u3001 Add the parameter \u201cScale of Pressure Sensor\u201d into \u201cSystem Config – Vacuum\u201d;<\/p>\n\n\n\n

    \"TVM802a<\/figure>\n\n\n\n

    5\u3001 Add the parameter \u201cEnable Single Comp X\/Y Speed\u201d into \u201cSystem Config – Other\u201d;<\/p>\n\n\n\n

    \"TVM802a<\/figure>\n\n\n\n

    This parameter is checked. The \u201cspeed\u201d in the component parameter table will be applied globally (including the X\/Y\/Z axis, etc.), otherwise it will only affect the speed of the Z axis;<\/p>\n\n\n\n

    \"TVM802a<\/figure>\n\n\n\n

    6\u3001Modify the BUG about\u201cWhen adjust the Prick Offset\uff0cthe detection is not added after the error occurs\u201d;<\/p>\n\n\n\n

    7\u3001Modify the BUG about \u201cThe parameter \u2018Template Size\u2019 in the PCB Config does not match the actual value\u201d;<\/p>\n\n\n\n

    8\u3001Modify the BUG about \u201cWhen click the button \u2018Reset\u2019 in the PCB Config,some parameters can not be reset correctly\u201d;<\/p>\n\n\n\n

    9\u3001Optimize the adjustment scheme of Nozzle Offset which is between nozzle and the center of the down vision,add a new interface that is more intuitive;<\/p>\n\n\n\n

    \"TVM802a<\/figure>\n\n\n\n

    Instructions:<\/p>\n\n\n\n

    (1) Select any reference point, move the down camera to amid the reference point and set the current coordinates;<\/p>\n\n\n\n

    (2) Moving the nozzle 1 and the nozzle 2 respectively to amid the reference point and set the current coordinates;<\/p>\n\n\n\n

    (3) The value displayed by the detection result is the offset value of the nozzle to the center of the down camera.<\/p>\n\n\n\n

    \"TVM802a<\/figure>\n\n\n\n

    10\u3001Optimize the interactivity about the function of PCB Array.<\/p>\n\n\n\n

    V3.11 —— 2018\/7\/20<\/strong><\/p>\n\n\n\n

    1\u3001Modify the BUG about \u201cPlace Selected Components\u201d;<\/p>\n\n\n\n

    2\u3001Optimize the Speed\uff0creduce the speed with every component which in the Components Table is only effective when the Z axis drops the components;<\/p>\n\n\n\n

    3\u3001Compatible with the coordinate file of TXT format;<\/p>\n\n\n\n

    4\u3001When the coordinate file is imported, the space characters before\/after the content of the “Comment” item in the list are automatically deleted;<\/p>\n\n\n\n

    5\u3001Add the parameter \u201cComp Angle Offset\u201d into \u201cSystem Config – Other\u201d;<\/p>\n\n\n\n

    \"TVM802a<\/figure>\n\n\n\n

    V3.10 —— 2018\/6\/20<\/strong><\/p>\n\n\n\n

    1\u3001Modify the BUG about \u201cAimed With Camera\u201d;<\/p>\n\n\n\n

    2\u3001Add the function that the Z Axis could return to the origin home,and check all the time if the Z Axis is at the origin home.<\/p>\n\n\n\n

    V3.09 —— 2018\/04\/24<\/strong><\/p>\n\n\n\n

    1\u3001Modify the BUG about \u201cImage Template\u201d:the vision can\u2019t switch when the down vision identification is in mistake, and the vision can\u2019t identify before get the pictures of Image Template.<\/p>\n\n\n\n

    2\u3001Add the parameter \u201cRange\u201d into \u201cImage Template\u201d;<\/p>\n\n\n\n

    3\u3001Modify the BUG when use the function \u201cPCB Edit – Array – Auto\u201d\uff0ccan\u2019t restart.<\/p>\n\n\n\n

    V3.08 —— 2018\/04\/04<\/strong><\/p>\n\n\n\n

    1\u3001Modify the BUG that the data \u201cAngle\u201d which is in the list \u201cSub Pcb Reference Point Pos\u201d didn\u2019t have any effect;<\/p>\n\n\n\n

    \"TVM802a<\/figure>\n\n\n\n

    2\u3001Add one new algorithm for the recognition function of mark point \uff1a\u201cImage Template\u201d.And optimize the interface.<\/p>\n\n\n\n

    \"TVM802a
    a\u3001The \u201cSize\u201d in the \u201cTemplateParam\u201d corresponds to the size of the Red Box in the Down Vision.And select the appropriate image as the template by adjusting the red box size.
    <\/figcaption><\/figure>\n\n\n\n
    \"TVM802a


    <\/figcaption><\/figure>\n\n\n\n

    b\u3001Click the button \u201cGet\u201d to get the image template of Mark.<\/p>\n\n\n\n

    \"TVM802a<\/figure>\n\n\n\n

    c\u3001Click the button \u201cTest\u201d\u3002The Bule Box is the image which matches the image template. Below the vision screen,\u201cOffsetX\u201d and\u201cOffsetY\u201dreflect the offset of the matched template.
    <\/p>\n\n\n\n

    \"TVM802a<\/figure>\n\n\n\n

    d\u3001The data of \u201cImageMark\u201d are saved to the CSV file.<\/p>\n\n\n\n

    V3.07 —— 2018\/03\/20<\/strong><\/p>\n\n\n\n

    1\u3001Optimize the Speed of Z Axis\uff1b<\/p>\n\n\n\n

    2\u3001Modify the BUG when use \u201cMakeRule\u201d\uff0cthe coordinate will be messy code.<\/p>\n\n\n\n

    V3.06 —— 2017\/11\/28<\/strong><\/p>\n\n\n\n

    1\u3001Optimize the parameter “Component Threshold” which is used in the Vision of the Components, each of The Stack(Left\/Back\/IC) has its own Component Threshold.The parameter data of the Left\/Back Stack is saved to the main board, and the parameter data of the IC Stack is saved to the CSV file.<\/p>\n\n\n\n

    \"TVM802a<\/figure>\n\n\n\n
    \"TVM802a<\/figure>\n\n\n\n

    2\u3001Optimize the interface:<\/p>\n\n\n\n

    (1)Move the interface of \u201cRun\u201d\u201cManual\u201d\u201cAuto\u201d;<\/p>\n\n\n\n

    The old:<\/strong><\/p>\n\n\n\n

    \"TVM802a<\/figure>\n\n\n\n

    The new:<\/strong><\/p>\n\n\n\n

    \"TVM802a<\/figure>\n\n\n\n

    \uff082\uff09Add a quick menu of \u201cPcbArray\u201d;<\/p>\n\n\n\n

    \"TVM802a<\/figure>\n\n\n\n

    (3)     Add the button which could switch the Vision;<\/p>\n\n\n\n

    \"TVM802a<\/figure>\n\n\n\n

    (4)Modify the method of change the speed,now use the button to add and subtract the speed.<\/p>\n\n\n\n

    \"TVM802a<\/figure>\n\n\n\n

    3\u3001Optimize the function of \u201cPcbArray\u201d, and the components in the list of each board are independent and can be changed manually.<\/p>\n\n\n\n

    4\u3001Modify the BUG that the Tip Box of \u201cAs The Camera Error !\u201dappears abnormally.<\/p>\n\n\n\n

    V3.05 \u2014\u2014\u2014 2017\/9\/28<\/strong><\/p>\n\n\n\n

    1\u3001Modify the BUG that can\u2019t use the function \u201cAmied With Camera\u201dof right-click menu.<\/p>\n\n\n\n

    2\u3001Optimize the Visual display.<\/p>\n\n\n\n

    V3.04 —— 2017\/9\/25<\/strong><\/p>\n\n\n\n

    1\u3001Modify the function \u201cSelect The Same\u201d of  right-click menu, the words of the selected lines are not case sensitive.<\/p>\n\n\n\n

    \"TVM802a<\/figure>\n\n\n\n
    \"TVM802a<\/figure>\n\n\n\n

    2\u3001Optimize the leak detection and increase the alarm about no components are picked and put.<\/p>\n\n\n\n

    3\u3001Add the function that the direction key on the keyboard can operate the machine, and the space key can switch the movement speed (LowSp\/HightSp).<\/p>\n\n\n\n

    4\u3001Optimize the pages of \u201cPCB Config\u201d<\/p>\n\n\n\n

    \uff081\uff09Interface Optimization<\/p>\n\n\n\n

    Three functional zones are divided according to different functions:<\/p>\n\n\n\n

     \u201cPCB\u201d:Set the mark points of each circuit board.<\/p>\n\n\n\n

    \u201cArray\u201d:Make the PCB Array rules.<\/p>\n\n\n\n

    \"TVM802a<\/figure>\n\n\n\n

    \u201cConfig\u201d:Identification parameters about mark points,and circuit board\u2019s thickness.<\/p>\n\n\n\n

    \"TVM802a<\/figure>\n\n\n\n

    \uff082\uff09The Function Of PCB Array Optimization<\/p>\n\n\n\n

    When the number of circuit boards exceeds 5,this update method is recommended.<\/p>\n\n\n\n

    \"TVM802a<\/figure>\n\n\n\n

    Figure 1<\/p>\n\n\n\n

    \u2460According to the actual situation, fill in the number of rows and columns,then click \u201cCreate\u201d to create pcb array(displaying in the left list(Figure 1)).<\/p>\n\n\n\n

    \u2461Measuring the space of each Sub PCB.Respectively capture the reference point coordinates of these three Sub PCB such as the 1,2,3 board(displaying in the Figure 2 ).Then click \u201cNext\u201d to calculate the reference point coordinates of each Sub PCB.And the information of the reference point coordinate is displaying in the right list(Figure 1).<\/p>\n\n\n\n

    \"TVM802a<\/figure>\n\n\n\n

    Figure 2<\/p>\n\n\n\n

    \u2462Click “Auto” ,automatically identify each reference point and correct the coordinates.<\/p>\n\n\n\n

    \uff083\uff09Introduction of relevant interactive functions<\/p>\n\n\n\n

    \u2460The parameters of the PCB Configuration is saved to the CSV File.Please save it in time.<\/p>\n\n\n\n

    \u2461Click and select the graphic elements in the left list,the corresponding information of the Sub PCB which is selected will be displaying in the right list.The information include the reference point coordinate of each Sub PCB and the coordinate of every component which is on this Sub PCB.<\/p>\n\n\n\n

    \"TVM802a<\/figure>\n\n\n\n
    \"TVM802a<\/figure>\n\n\n\n

    \u2462Click the button in the top left of the right list.It will switch the different data.<\/p>\n\n\n\n

    \u2463About the function of button.<\/p>\n\n\n\n

    \u201cSkip Over\u201d:Click and select the corresponding Sub PCB in the left list,then click this button to decide whether pick and put this Sub PCB.<\/p>\n\n\n\n

    \u201cSet XY\u201d:Move the Down Vision Camera to aim at the point ,and then capture the coordinate.<\/p>\n\n\n\n

    \u201cAim XY\u201d:According to the selected point coordinate,move and aim at the point.<\/p>\n\n\n\n

    \u201cAuto\u201d:Automatic recognition the reference points of each Sub PCB.<\/p>\n\n\n\n

    \"TVM802a<\/figure>\n\n\n\n
    \"TVM802a<\/figure>\n\n\n\n
    \"TVM802a<\/figure>\n\n\n\n

    6\u3001Optimize the step of \u201cPrick MoveTo\u201d( Prick MoveTo\u3001Prick Comp\u3001Nozzle MoveTo),\u201cReset\u201dis to make the prick needle and nozzle to zero.<\/p>\n\n\n\n

    \"TVM802a<\/figure>\n\n\n\n

    7\u3001Add a button to display \u201cCurPcbNum\u201d,and can one step jump back to the beginning of the first PCB.<\/p>\n\n\n\n

    \"TVM802a<\/figure>\n\n\n\n

    V3.03 —— 2017\/6\/29<\/strong><\/p>\n\n\n\n

    1\u3001The data of IC Stack can be saved to the csv file.<\/p>\n\n\n\n

    2\u3001Add the parameter : \u201cComment\u201d.<\/p>\n\n\n\n

    It is used to record the information about your IC.<\/p>\n\n\n\n

    3\u3001Add the function that you can click the button to find the information of the IC Stack according to the number.<\/p>\n\n\n\n

    \"TVM802a<\/figure>\n\n\n\n

    4\u3001Add the function \u201c Place Selected Components \u201d into right-click menu.<\/p>\n\n\n\n

    \"TVM802a<\/figure>\n\n\n\n

    5\u3001Add the function \u201c Strength \u201d into \u201c PCB Config — Mark Config\u201d. This function can enhance the recognition strength of Mark Point according to the light source of different environment.<\/p>\n\n\n\n

    \"TVM802a<\/figure>\n\n\n\n

    6\u3001Optimize the adjustment of the parameter \u201c Nozzle Offset \u201d. To make it easier to adjust the offset between the nozzle and the down vision camera.<\/p>\n\n\n\n

    Usage:<\/p>\n\n\n\n

    (1)\u3001Let the down vision camera aim at a reference point( it can be any component coordinates);<\/p>\n\n\n\n

    (2)\u3001Click the button \u201c Nozzle MoveTo \u201d;<\/p>\n\n\n\n

    (3)\u3001Click the \u201c Nozzle Down \u201d;<\/p>\n\n\n\n

    (4)\u3001Move the pick and place head, let the nozzle aim at the selected reference point;<\/p>\n\n\n\n

    (5)\u3001Click the \u201c Nozzle Up \u201d;<\/p>\n\n\n\n

    (6)\u3001Click the \u201c Camera MoveTo \u201d<\/p>\n\n\n\n

    (7)\u3001The above steps are a cycle.You should replay these steps until get the correct \u201c Nozzle Offset \u201d.<\/p>\n\n\n\n

    \"TVM802a<\/figure>\n\n\n\n

    V3.02 —— 2017\/6\/5<\/strong><\/p>\n\n\n\n

    1\u3001Add the Parameter : \u201cAuto Go Home\u201d.<\/p>\n\n\n\n

       It\u2019s a switch whether to use this function.<\/p>\n\n\n\n

    \"TVM802a<\/figure>\n\n\n\n

    2\u3001Add the function that directly position the prick needle through a button.<\/p>\n\n\n\n

    \"TVM802a<\/figure>\n\n\n\n

    3\u3001Add the function that there are two ways to get positions.<\/p>\n\n\n\n

    \"TVM802a<\/figure>\n\n\n\n

    4\u3001Add the function \u201c Aimed with Nozzle \u201d into right-click menu.<\/p>\n\n\n\n

    \"TVM802a<\/figure>\n\n\n\n

    5\u3001Optimize the way to adjust the nozzle offset better.<\/p>\n\n\n\n

    \"TVM802a<\/figure>\n\n\n\n

    6\u3001Change the position of the original parameters, respectively move the parameters: that \u201c Left Prick Offset \u201d and \u201c Back Prick Offset \u201dwhich are in the \u201c Other \u201d page to the \u201c Left Stack \u201d and \u201c Back Stack \u201d pages .<\/p>\n\n\n\n

    7\u3001Optimize the data transfer protocol.<\/p>\n\n\n\n

    \"TVM802a<\/figure>\n\n\n\n
    \"TVM802a<\/figure>\n\n\n\n

    V3.01—— 2017\/6\/5<\/strong><\/p>\n\n\n\n

    1\u3001Use the down vision camera\u2019s coordinate point for the reference point to set the any component\u2019s point.<\/p>\n\n\n\n

    2\u3001Add the \u201c Vacuum \u201d page.<\/p>\n\n\n\n

    \"TVM802a<\/figure>\n\n\n\n

    Vacuum Threshold Adjustment Description:<\/p>\n\n\n\n

    (1)When Vacuum Value < Vaccum Threshold1, it’s judged that the component is not sucked, and then re-suck ;<\/p>\n\n\n\n

    (2)When Vacuum Threshold1 < Vacuum Value < Vacuum Threshold2, it’s judged that suck component is not done well. Discard it and then re-suck;<\/p>\n\n\n\n

    (3)When Vacuum Value > Vaccum Threshold2, it’s judged that suck component is done well and continue run .<\/p>\n\n\n\n

    3\u3001Delete the parameters:\u201cExposure\u201d\u3001\u201cPlace Blowing\u201d\u3001\u201cSerial Number\u201d.<\/p>\n\n\n\n

    4\u3001Add one new algorithm that when place two components together through quick vision,take two pictures first and then deal with the data together.<\/p>\n\n\n\n

    5\u3001Change the driver of the new camera.<\/p>\n\n\n\n

    6\u3001Add one new algorithm for the recognition function of mark point \uff1a\u201cTemplate\u201d.And add the parameter : \u201cTemplate Param\u201d.<\/p>\n\n\n\n

    \"TVM802a<\/figure>\n\n\n\n

    7\u3001When open the Vacuum 2 min\uff0cthe buzzer will alarm and then turn off it.<\/p>\n\n\n\n

    8\u3001When a file is placed 5 times,the machine will go home automatically.<\/p>\n\n\n\n

    9\u3001Add a parameter : \u201cIs Use AutoSort\u201d.<\/p>\n\n\n\n

    \"TVM802a<\/figure>\n\n\n\n

       It\u2019s a switch whether to use this function.<\/p>\n\n\n\n

    10\u3001Add the function that can drag each line in the component information table.<\/p>\n\n\n\n

    11\u3001The bottom layer adds the new algorithm about \u201cS acceleration\u201d,it can increase the speed overall.<\/p>\n\n\n\n

    12\u3001Modify the BUG that the \u201cHome X\/Y\u201d can not save.<\/p>\n\n\n\n

    WHAT IS SMT pick and place machine\uff1f<\/h3>
    \n

    SMT (Surface Mounted Technology) is a comprehensive system engineering technology, which covers substrates, design, equipment, components, assembly processes, production accessories and management. When it comes to SMT pick and place machines, the automatic SMT production line requires automatic loading and unloading machine, automatic solder paste printing machine, placement machine, reflow soldering machine, AOI inspection equipment, connecting table, etc. For these SMT assembly line equipment, Qihe SMT can offer you machines in prototype SMT line, small SMT production line, mass production SMT line at low SMT line cost. Contact us now if you are interested.<\/p>\n<\/div><\/div>\n\n\n\n

    WHAT IS SMT ASSEMBLY LINE\uff1f<\/h3>
    \n

    With the development of technology, future electronic products will be lighter, smaller and thinner. Traditional assembly technology can no longer meet the requirements of high-precision and high-density assembly. A new type of PCB assembly technology-SMT (Surface Mount Technology) has emerged. SMT Assembly is the use of automated machines to assemble electronic components on the surface of the circuit board. Its density, high speed, standardization and other characteristics occupies an absolute advantage in the field of circuit assembly technology. In addition, SMT assembly has a wide range of uses.<\/p>\n<\/div><\/div>\n\n\n\n

    \"\"<\/figure>\n\n\n\n
    \"tvm802a<\/figure>\n\n\n\n
    \"smt<\/figure>","protected":false},"excerpt":{"rendered":"

    TVM802 Series Software Firmware Update log<\/p>","protected":false},"author":1,"featured_media":3844,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"om_disable_all_campaigns":false,"_mi_skip_tracking":false,"footnotes":""},"categories":[1],"tags":[99,100,139,140,367,366,368],"class_list":["post-1041","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-technical-support","tag-qihe","tag-small-pick-and-place-machine","tag-support","tag-tvm802","tag-tvm802ax-installer","tag-tvm802b-installer","tag-tvm802bx-installer"],"aioseo_notices":[],"aioseo_head":"\n\t\t\n\t\n\t\n\t\n\t\n\t\n\t\t\n\t\t\n\t\t\n\t\t\n\t\t\n\t\t\n\t\t\n\t\t\n\t\t\n\t\t\n\t\t\n\t\t\n\t\t\n\t\t\n\t\t