{"id":2046,"date":"2022-10-21T14:06:00","date_gmt":"2022-10-21T06:06:00","guid":{"rendered":"https:\/\/www.qhsmt.com\/?p=2046"},"modified":"2022-11-02T14:47:15","modified_gmt":"2022-11-02T06:47:15","slug":"qm61-smt-pick-and-place-machine-programming","status":"publish","type":"post","link":"https:\/\/www.qhsmt.com\/zh\/2022\/10\/21\/qm61-smt-pick-and-place-machine-programming\/","title":{"rendered":"QM61 smt pick and palce machine file programming"},"content":{"rendered":"

To operate smt pick and palce machine QM61 pnp file programming, it must be turned on according to the operating procedures to ensure personal and equipment safety. QHSMT tech will briefly describe the steps for starting the placement IC mounter:<\/p>\n\n\n\n

Proceed as follows:<\/p>\n\n\n\n

\"Smt<\/figure>\n\n\n\n
    \n
  1. Check whether the air pressure of the placement machine meets the equipment requirements, generally it should be about 5kg\/cm2.<\/li>\n\n\n\n
  2. Turn on the system.<\/li>\n\n\n\n
  3. Return all axes of the placement machine to the origin.<\/li>\n\n\n\n
  4. Adjust the width of the placement machine guide rail to be about 1mm greater than the width of the PCB, and ensure that the PCB slides freely on the guide rail.<\/li>\n\n\n\n
  5. Set up and install the PCB positioning device. Generally, there are two methods of needle positioning and edge positioning.<\/li>\n<\/ol>\n\n\n\n
    \"Smt<\/figure>\n\n\n\n
    \"Smt<\/figure>\n\n\n\n
    \"Smt<\/figure>\n\n\n\n

    Needle positioning method:<\/p>\n\n\n\n

    When using needle positioning, adjust the position of the positioning needle so that the positioning needle is just in the middle of the positioning hole of the PCB, so that the PCB can be positioned up and down freely.<\/p>\n\n\n\n

    \"Smt<\/figure>\n\n\n\n

    Edge positioning method:<\/p>\n\n\n\n

    Place the PCB support thimble according to the thickness and external dimensions of the PCB to ensure that the PCB is evenly stressed and not loose during patching. If it is a double-sided mounting PCB, after the B side is mounted, the position of the PCB support thimble must be readjusted to ensure that when the A side is mounted, the PCB support pin avoids the mounted components on the B side.<\/p>\n\n\n\n

      \n
    1. After the setting is completed, the PCB can be installed for online programming or patch operation.<\/li>\n<\/ol>\n\n\n\n

      The above are the steps and precautions for starting the placement machine. After the startup is completed, it is necessary to program the placement of the placement machine.<\/p>\n\n\n\n

      The placement program consists of a pickup program and a placement program.<\/p>\n\n\n\n

      \"Smt<\/figure>\n\n\n\n
        \n
      1. Pickup program<\/li>\n<\/ol>\n\n\n\n

        The pickup program tells the placement machine where to pick up the piece and what kind of component information to pick up. The content includes: the component name of each step, the offset of X, Y and corner of the pick-up in each step, the position of the feeder, the type of the feeder, the height of the pick-up, the position of the material to be thrown, whether to skip, etc. .<\/p>\n\n\n\n

        \"Smt<\/figure>\n\n\n\n
          \n
        1. Placement Patch program<\/li>\n<\/ol>\n\n\n\n

          The placement program tells the machine where to place the components, the angle of the placement, the height of the placement, etc.<\/p>\n\n\n\n

          The content includes the component name of each step, the X, y coordinates and corners of each step, whether the height of the patch needs to be corrected, the number of the patch head to be patched, whether multiple heads are picking up at the same time, whether to skip steps, etc.: patch program It also includes X, y coordinate information of PCB and local Mark, etc.<\/p>\n\n\n\n

          The placement machine engineer operator can understand machine repair, shift scheduling, placement programming, and then be proficient in operating various SMT pick and place machines and SMT production lines during the processing process<\/p>\n\n\n\n

          <\/p>\n\n\n\n

          you can find a set of smt pick and place machine you need ,we have lots of series for you to choose.<\/p>\n\n\n