{"id":6246,"date":"2024-10-31T16:06:23","date_gmt":"2024-10-31T08:06:23","guid":{"rendered":"https:\/\/www.qhsmt.com\/?p=6246"},"modified":"2024-10-31T16:07:11","modified_gmt":"2024-10-31T08:07:11","slug":"what-are-the-components-of-pick-and-place-machine","status":"publish","type":"post","link":"https:\/\/www.qhsmt.com\/zh\/2024\/10\/31\/what-are-the-components-of-pick-and-place-machine\/","title":{"rendered":"What are the components of pick and place machine ?"},"content":{"rendered":"
\n

For the operation of the mounter many people just contact is not too understand, some of the old mounter operator of the mounter parts at the same time is also half-know, so it is easy to appear to lead to the occurrence of system failure, the following mounter manufacturers to give you an introduction to analyse the various important components of the mounter parts, in order to help more people to operate the mounter reasonably.<\/p>\n<\/blockquote>\n\n\n\n

Main machine<\/mark><\/strong><\/p>\n\n\n\n

    \n
  1. Main power switch: Turn on or off the host power supply.<\/li>\n\n\n\n
  2. Visual display: display China Mobile a lens analysis of the image or component and mark recognition development.<\/li>\n\n\n\n
  3. Operation display: display the VIOS software screen of the machine operation, if there is an error or problem in the operation process, the correction information is also displayed on the painting surface.<\/li>\n\n\n\n
  4. Warning light: indicates the automatic placement machine in green, yellow and red operating technical conditions.
    Green: The machine is in automatic running state
    Yellow: Errors (failure to perform efficiently between the return to the origin, picking up errors, identifying system faults, etc.) or interlocking devices are generated.
    Red: The machine is in an emergency stop state (when the machine or ypu stop button is pressed).
    Emergency Stop button: Press this button to trigger an emergency stop immediately.<\/li>\n<\/ol>\n\n\n\n

    Working head assembly<\/mark><\/strong><\/p>\n\n\n\n

    1.Working head assembly:Move in XY direction(or X direction), pick up parts from feeder and mount them on PCB.
    2.Working head assembly to move the handle: when the servo system control can be lifted, you can use the hand in each development direction as well as moving, when using the hand to move the management work head assembly usually use this handle.<\/p>\n\n\n\n

    Vision system<\/mark><\/strong><\/p>\n\n\n\n

      \n
    1. Moving Lens:Used to identify marks on printed circuit boards or to track the position or coordinates of the shot.<\/li>\n\n\n\n
    2. Independent lens:Used to identify components, mainly those with pins QPF.<\/li>\n\n\n\n
    3. Backlit components:When it is recognised by the independent vision lens, the element is illuminated from the back.<\/li>\n\n\n\n
    4. Laser components:Through the use of laser beams can be used to carry out the identification of technical parts, mainly sheet parts.<\/li>\n\n\n\n
    5. Multi-video lenses:Can identify a variety of parts to speed up the identification speed.<\/li>\n<\/ol>\n\n\n\n

      Feeding platform<\/mark><\/strong>
      With loading feeder, bulk feeder and tube feeder (multi-tube feeder), which can be installed on the front or rear feeding platform of the mounter.<\/p>\n\n\n\n

      Axis structure<\/mark><\/strong>
      x:The moving head assembly is parallel to the PCB transfer direction.
      Y-axis: the moving management work head assembly is perpendicular to the direction of PCB transfer.
      Z-axis: control the height of the working head assembly.
      R-axis: control the rotation of the nozzle axis of the working head assembly.
      W-axis: Adjusts the width of the conveyor track.<\/p>\n\n\n\n

      Transport rail components<\/mark><\/strong>
      1\u3001Main stopper
      2\u3001Positioning pin
      3\u3001Input and push parts
      4\u3001Edge clamp
      5\u3001Push up plate
      6\u3001Upthrust ejector pin
      7\u3001Entrance plate<\/p>\n\n\n\n

      Nozzle station:<\/mark><\/strong>
      allows the automatic exchange of nozzles, with a total of 16 nozzles, 7 standard and 9 optional.
      <\/p>\n\n\n\n

      Air supply components:<\/mark><\/strong>
      including air filter, air pressure adjustment button and air pressure gauge.<\/p>\n\n\n\n

      Input and operating parts\uff1a<\/mark><\/strong><\/p>\n\n\n\n

        \n
      1. YPU programming parts
        Ready button:Abnormal stop release, servo system effective.<\/li>\n\n\n\n
      2. Keyboard<\/li>\n<\/ol>\n\n\n\n

        The above is the insights of Yueqing Qiho Electronic Technology Co., Ltd. on what components the mounter consists of, I hope it will be helpful to you.<\/p>\n\n\n\n

        ABOUT QIHE<\/em><\/strong><\/p>\n\n\n\n