LED Placement Machine Requirements For Temperature And Humidity

The LED placement machine is one of the SMT placement machines. With the continuous development of LED technology, the traditional SMT placement machine is not suitable for meeting the production needs of the LED industry. At this time, the LED placement machine came into being. The LED placement machine is also a relatively high-precision automated production device, and the requirements for the working environment are also very strict, and maintenance is often carried out at a fixed time. If the maintenance is improper, it may cause problems in use.

The temperature requirements of the LED placement machine:

The working environment temperature of the LED placement machine printing device requires 23 degrees Celsius plus or minus three degrees is the best, so the working environment temperature is best set between this value. Under normal circumstances, it is better to set the operating temperature at 17 to 28 degrees Celsius; if this value is not reached, the maximum temperature should not exceed the limit temperature of 15 to 35 degrees Celsius.

Humidity requirements for LED placement machines:

In the production environment, humidity has a relatively large impact on product quality. If the humidity is too high, the components will easily absorb moisture, which is not conducive to moisture-sensitive components. At the same time, the solder paste will easily absorb moisture when exposed to moist air, causing soldering defects. If the humidity is too low and the air is dry, static electricity is likely to be generated, which is not conducive to static-sensitive components (ESD). Therefore, the humidity of the environment must be controlled. Generally, the relative humidity in the working environment is required to be about 45 to 70%, and some require 30 to 55 RH, and for looser ones, it can reach 40%. To 80%RH.

The above content is the editor briefly tells you about the temperature and humidity requirements of the LED placement machine. I hope this article will help you.

Leave a Reply

Your email address will not be published. Required fields are marked *