Support #TVM925 Flight Camera Vision Software Update Log

TVM925 Flight camera Vision Software Update Log

Original factory model: TVM925 (1pc flight camera vision )
Distributor possible model:SMT380

Previous version V3.02 – V3.15
Current Updatable Version V3.16

Email to your customer service manager to update the latest software.
Please provide your device model, Sn-number and current software version code .

If you cannot find or forget your manager’s contact or even purchased from a distributor.
Please leave us a message in our website dialog box or email us.
In addition to the device model,SN number and current software version code.
we also need your explain which way you purchased from. Also your email we’ll send the software to.
After verifying your information, we will update the software to you ASAP.

V3.16 – 220610

1.The displayed error occurs when the software reads the parameters in the decimal format in the database in the Russian environment.

V3.15 – 220531

1.Add the function of correcting the coordinates after the coordinate to the array.

V3.14 – 220524

1. Model algorithm updated to version 4.2, freeing image memory.

2. When the size detection is abnormal, it will stop at the scrap position and alarm。

3. The BUG that the automatic sorting fails to enter an infinite loop, and jumps out of the loop when the number of times reaches the number of components.

4. When entering the automatic sorting, an error occurred in the assignment of the component package.

5. Increase the search function.

6. After visual recognition, the angle correction range is modified to -180~180.

7. After the material is discarded, the angles of the attached components are reset to zero.

8. In the judgment of whether the suction nozzles are sucked together, the value of the absolute value has interference.

V3.13 – 220421

Compatible with csv file formats.

V3.12 – 220418

1.Automatic detection in the component database when the flight direction is not specified when in fly mode.

2. Automatic detection in the component database is automatically turned off when exiting.

3. Legalize the format of model parameters.

4. An error occurred while saving the data to the database.

5. The model algorithm is updated to version 4.1.

V3.11 – 220415

1.Power on and start the software, the first time the software is opened, the character of log is empty and an error is reported.

2.Added the function of automatically reading model images.

3.A bug that causes the software to crash when it enters an infinite loop when it is prioritized by automatic sorting.

V3.10 – 220328

1.File cannot be loaded after saving:wrong space symbol.

V3.09 – 220308

1.Data save error when adding new component to database.

2.Added parameter ‘templates’ and ‘algorithms’ when saving files.

3.The array coordinates of the ic stack are loaded incorrectly.

V3.08 – 220301

1.English interface translation disorder.

2.The initial angle when the model correction cannot be obtained continuously.

3.Switching the visual check mode in the component database causes the camera to get stuck.

4.Database data read error when entering placement optimization。

5.After the camera is detected in the component database, the z-axis alarms and gets stuck.

6.Flying shots are not detected during automatic measurement.

V3.07 – 220224

1.The camera failed to initialize when opening the software for the first time after the machine was powered off.

2.Reassign device parameters according to database information when entering automatic sorting.

3.In the omponent editing interface the stack selection function is canceled.

4.When entering the Feida setting interface in automatic sorting, clear the stack information, and check whether the stack number and stack name are consistent.

5.When the feeder is automatically sorted, first clear the feeder options and list display on the interface.

6.After leaving the feeder setting interface, it prompts that the line number of feeder has not been set, and the line number column is added to the feeder interface.

7.Optimize automatic sorting to avoid infinite loops.

8.When loading the file, the component name is capitalized and the extra space bar in the string is removed.

V3.06 – 220210

1.The light source is turned on incorrectly in HD mode.

2.The data of the back feeder and IC stack failed to be saved in the file.

3.Optimize automatic sorting.

4.The discard button in the component information editor is invalid.

5.Camera stuck when testing in component information.

6.Format error for speed parameter in automatic measurement. 

7.The closing and opening of the relevant timer when the test button is changed in the component information editing。

8.In fly mode, only the screen results of participating component identification will be displayed.

9.A data format error bug occurs when emptying the stack.

V3.05 – 220205

1.Increase the light source selection method.

V3.05 .1

V3.04 – 220117

1.Modify the BUG about log file “LogReport” writing.

2.Modify the bug that an abnormal error occurs when the nozzle is not selected in the size detection.

3.Modify the method of discarding materials, down visual positioning, and discard materials one by one.

4.Modify the BUG of IC sorting.

V3.02 – 211123

1.Add placement message bar and placement report.

V3.02 .1
V3.02 .2

2.Optimize the button enable change of the main interface.

3.Modify the BUG that the down-view recognition is enlarged by 1.5 times.

4.Modify the BUG that the stack parameter “name” is not initialized.

5.Cancel the pressure detection for material shortage, and is compatible with the material shortage detection parameters of the original database.

6.Add the function of quickly generating feeder coordinates.

7.Added the function of prompting whether to save the file when closing the software.

Leave a Reply

Your email address will not be published. Required fields are marked *