pnp machine,chip mounter,smt line,pick and place machine,pick and place robot,desktop pick and place machine,used pick and place machine,small pick and place machine,chip shooter,smt equipment,smt machine,openpnp,pcb printer,reflow oven,smt pick and place machine, stock in eu,feeder,smt assembly,pcb assembly,smd chip shooter,tvm802a,tvm802b,tvm802ax,tvm802bx,tvm802c,tvm802d, tvm802a s,tvm802b s,ql41,qm41,tvm925,tvm926,qm61,qm81,qm10 qhsmt

Pneumatic feeder of the Pick and place machinedaily inspection and maintenance

Today author from qihe smt pick and place machine sharing you with Pneumatic feeder of the Pick and place machinedaily inspection and maintenance
Purpose: In order to be able to use the belt feeder safely and for a long time, it must be checked and maintained regularly.

  1. Daily inspection

Before using the tape feeder, please check the following related items.

a. Whether the fixing rod is loose

b. Whether the belt guide is loose

c. Are the screws loose?

d. Whether there are deformed or damaged components

e. Whether any components are missing

2 Cleaning of belt guides

In the gap between the belt guide and the plate, if electronic components and other garbage fall into the gap, the belt guide will be loosened, the component transfer port will be deformed, and the components will be sucked.

The offset of the attached position. When a similar phenomenon occurs, follow the steps below to clean it.

step1Remove the tape guide.

Loosen the screws that fix the tape guide shaft above, and remove the tape guide and guide shaft. Please use a screwdriver to turn the tape guide shaft for easy disassembly.

Remove the tape guides

qihe Smt pick and place machine Yamaha CL feeder maintenance tips

step2 to clean.

Please use a brush to clean the debris between the tape guides and the plates.

Cleaning the tape guides

qihe Smt pick and place machine Yamaha CL feeder maintenance tips

step3 Check the operation status of the component transfer port.

Check that the component transfer port is operating correctly. If it is clamped or the action is slow, please replace the new tape guide in time.

Check the operating status

qihe Smt pick and place machine Yamaha CL feeder maintenance tips

step4 Load the belt guide rail.

Install the tape guide and guide shaft on the plate in reverse order. Please use a flat-blade screwdriver to turn the guide shaft 180 degrees counterclockwise, and apply

Add elasticity. Keep this state and tighten the set screw of the tape guide shaft. Afterwards, make sure that there is no gap between the tape guide and the plate.

Cleaning the tape guides

qihe Smt pick and place machine Yamaha CL feeder maintenance tips
Read more: Pneumatic feeder of the Pick and place machinedaily inspection and maintenance

The above is the author from qihe smt pick and place machine wants to sharing with you. If there is some inappropriate content or suggestion .I hope you can leave a reply to tell me and communicate with each other.
you can choose a reflow oven to meets your need like qfr630,qrf835,qrf1235
stencil printer model qh3040,qp3250,qfa5060
Also we have different kinds of smt pick and place machine like tvm802a,tvm802b,tvm802ax,tvm802bx,tvm925s,tvm926s,ql41,qm61,qm62,qm81,qm10

5 Comments

  1. it’s nice webstie!!
    And nice pick and place machne! very professional!
    nice job!

  2. I was pretty pleased to find this great site. I want to to thank you for ones time just for this fantastic read!! I definitely really liked every little bit of it and I have you book-marked to see new stuff in your blog.

    1. thanks
      If it does help you, you can also share it with your friends
      We also provide complete SMT production line equipment and technical services.

  3. Hello! This post couldn’t be written any better! Reading through
    this post reminds me of my good old work mate! He always kept talking about this.

    I will forward this page to him. Pretty sure he will have a good
    read. Thanks for sharing!

    1. Dear Glad this blog helped you.
      If you need SMT equipments pls send us an inquiry .

Leave a Reply to romantik69.co.il Cancel reply

Your email address will not be published. Required fields are marked *